current position：
Home
>
Product Center > Chlorosulfonated Polyethylene (CSM)
Chlorosulfonated polyethylene, referred to as CSM, is a kind of elastomer which has completely saturated main chain and pendant group and can be vulcanized by all kind of cross linking agent.
CONTACT US PDF FORMATn General introduction
Chlorosulfonated polyethylene, referred to as CSM, is a kind of elastomer which has completely saturated main chain and pendant group and can be vulcanized by all kind of cross linking agent. Because of its unique molecular structure, CSM vulcanizate has excellent ozone resistance and weatherability. In additional, properly formulated CSM vulcanizate has excellent resistance to heat, oil, chemicals and aging.
SUNPREN™ CSM is chlorosulfonated polyethylene produced by Sundow Polymers Co.,LTD.
n Characteristic of CSM
Permanent bright colors
Superior ozone and weather resistance, even for the formation without carbon black
High working temperature up to 150℃
Resistance to a wide range of aggressive chemicals
Moderate resistance to oil and solvent depending on chlorine level
Good flame retardancy
Electrical insulating properties
Excellent resistance to abrasion and mechanic abuse
n SUNPREN CSM
Sundow Polymers supplies two series CSM grades, one is H-series, which is produced by traditional solvent technology; another is M-series, which is produced by non-solvent technology.
Sundow SUNPREN CSM Guide
SUNDOW SUNPREN CSM | DUPONT HYPALON | TOSOH TOSO-CSM | SUNDOW SUNPREN CSM main datas | Distinguishing Features | Application | ||
Chlorine content, % | Sulfur content,% | Mooney Viscosity ML(1+4) 100 deg.C | |||||
H-4535 / M-4035 | 40S | TS-430 | 33-37 | 1.0-1.5 | 40-50 | n General –purpose grade n Good balance in physical properties and processability | Automotive hoses, rubber seal, wire and cable，rubber rollers，tape and specialty rubber products |
H-5535 / M-5035 | 40 | TS-530 | 33-37 | 1.0-1.5 | 50-60 | n Similar to H-4535/M-4035 with high Mooney viscosity | Automotive hoses, rubber seal, wire and cable，rubber rollers，tape and specialty rubber products |
H-4085 / M-8535 | 4085 | TS-830 | 33-37 | 1.0-1.5 | 85-95 | n Similar to H-5535/M-5035,but with higher Mooney viscosity | High performance automotive hoses, special hose，seal, oil seal products，wire and cable，rubber compound，special rubber roller，special tape and special rubber products |
H-45 / M-352 | 45 | TS-320 | 23-27 | 1.0-1.5 | 35-45 | n Low Chlorine content than general grades, with high hardness and good resistance to cold | Thermoplastic that can be used without curing |
Above is just part of our grades, if you want to know further information or more grades, please contact info@sundow.com.
n Application
◆ Power steering and oil cooler hose for automotive and industrial, hydraulic hose, where impulse testing is performed up to 150℃.
◆ Fuel hose covers, various vacuum and emission tubing.
◆ Sheathing material for cable construction, resistant to weathering, sunlight, ozone, heat.
◆ General industrial products, such as hydraulic pressure hose, oil and chemical delivery hose, rubber roller, liner, chemical resistant and high strength convey belt etc.
◆ Construction products, such as handrail of escalator, pad, single-ply roofing system
◆ Fabric reinforced, heat-weldable lining for reservoirs and effluent pits.
◆ Other products, such as rubber dam, rubber dinghy etc.
◆ Coating and adhesives
 |  |
|  |
| Automobile hoses | Special rollers | Wire&cable | Waterproof roll |
Copyright © Sundow Polymers Co., Ltd.-Sundow is a reliable supplier in Plastic & Rubber field. Lu ICP Prepared 16037505 Disclaimers Site map | RSS | XML
+86-0536-8057068
