中文版 Go to Englisth Web русский
中文版  English русский
ПРОДУКЦИЯ

в социальных сетях
хлоропреновый каучук(CR)

SNR240T

Addtime:2013-2-18

SURPREN TM SNR240T

Introduction

Chloroprene rubber SNR240T has high bond strength, it is obtained by mercaptan modified and Chloroprene monomer by emulsion polymerization with better sprayability and brushability and high rate of crystallization. It can be seen as an equivalent to DENKA A-30 of Japan.

Characteristics

l  Fast rate of crystallization and stronger cohesion;

l  The lowest viscosity among the SNR24- series;

l  Better solubility and uniformity;

l  Adhesive cements prepared by SN240T is light in color and storage stability;

l  Excellent initial bond strength and bond strength, better spraying, smaller particles, non-splash, easy handling and the adhesion layer to keep a long time, can be dissolved in toluene or mixed solvents;

l  Good resistant to ozone, weather, oil, chemical corrosion and extension of the fine is not flammable;

l  The same applied properties as DENKA A-30 of Japan.

Appearance
White or light yellow chips, with talcum as a release agent, no mechanical impurities.

Typical property

Item

SNR240T

Broodfield solution viscosity,  5% toluene solution, 25 ºC, mPa.s

15 - 23

Mass fraction of volatiles,   wt. %

≤ 0.8

Mass fraction of ash,    wt. %

≤ 1.0

Comparable grades

Denka, Japan:       A-30

Application

SNR240T, which is a basic raw material for preparing adhesive cements, can be used alone or combination with other types, mainly suitable for preparing spraying low viscosity adhesive. Adhesive is suitable for bonding of the shoe industry, rubber leather, wood, metal and construction materials.

 

назад

Адрес: 8 F/L., Renhe Mansion, No.399, Xuanwu street, Economic developing Zone, Weifang City, Shandong Province, China.
Почтовый индекс: 261031 Тел: +(86) 536 8057068 Факс: +(86) 536 8057018 Email: info@sundow.com  sales@sundow.com  
Веб-сайт: http://www.sundow.com