中文版 Go to Englisth Web русский
中文版  English русский
Product Group
MBS impact modifier

MBS-7300

Addtime: 2012-5-9

                                                                   WELLPA TM MBS impact modifier-7300
            
Product description
WELLPLA TM MBS impact modifier-7300 is a Methylmethcrylate / Butadiene /Styrene Copolymer (MBS) copolymer, it is a transparent MBS grade which has the combination of excellent impact strength , good transparency and excellent processability.

Characteristic
Excellent impact strength at low and ambient temperature, good transparency, good thermal formability, low dust.

Application
High impact transparent film
High impact transparent sheet
High impact transparent containers
Blow or injection molded articles
Suction plastics
 
Typical physical property
Item
Specification
Appearance
White powder
Sieve remainder (20 mesh)  (%)
≤ 2.0
Volatile  (%)
≤1.0
Bulk density  (g/cm3)
0.2-0.4
Tensile strength  (Mpa) MD
≥50
Tensile strength  (Mpa) CD
≥50
Elongation at break  (%) MD
≥95
Elongation at break  (%) CD
≥130
Low-temperature impact test broken rate  (%)  (-25ºC)
≤30
Rotating impact tests pass  (%)
≥ 85
The bleaching
Observations
Transparency
≥ 85
Haze
≤ 1.5*
 
Packing, storage and transportation
20 kg or 25 kg bag.
This material is non-dangerous good for land, air and marine transportation.
Material should be kept away from flames, hot pipes, heater or other sources of heat. Adequate precautions should be taken to keep all dust levels below values that are hazardous to heath and safety. The recommended maximum storage temperature for this material is 45 deg.C.
 
FDA compliance
Compliance with FDA and European food and packaging regulations
 
Safe Handling
Please consult the MSDS before handling for additional information concerning personal protective equipment, Safety, Health and Environmental information, and always exercise the utmost care in handling.

Related links

MBS 7300 TDS. pdf

MBS Impact Modifier Selection Guide. pdf

[Go Back]

Office: 8 F/L.,Renhe Mansion, No.399, Xuanwu street, Economic developing Zone, Weifang City, Shandong Province, China.
Post code: 261031  TEL: +(86) 536 8057068  FAX: +(86) 536 8057018  Email:  info@sundow.com    
Chlorinated polyethylene (CPE) - Acrylic processing aid - Acrylic Impact ModifierMBS Imapct Modifier - Polychloroprene rubber - Chlorosulfonated polyethylene - ADC blowing agent   Privacy Policy 
Copyright © sundow.com