中文版 Go to Englisth Web русский
中文版  English русский
Product Group
MBS impact modifier

MBS-710

Addtime: 2012-5-9

WELLPA TM MBS impact modifier - 710
  
Product description
WELLPLA TM MBS impact modifier-710 is a Methylmethcrylate / Butadiene / Styrene Copolymer (MBS) copolymer, it is a transparent MBS grade offers exceptional balance of features ranging from crease-whitening resistance and attractive optical property to impact strength and ease of processing, in additional, compared with MBS-8720, this grade has higher price/performance ratio.

Characteristic
High impact strength, good transparency, good crease-whitening, good processability.
 
Application
Transparent sheet, plates, bottle etc.
 
Typical physical property
Item
Specification
Appearance
White powder
Sieve remainder (20 mesh)  (%)
≤ 2.0
Volatile  (%)
≤ 1.0
Bulk density  (g/cm3)
0.2 - 0.4
Tensile strength  (Mpa) MD
≥ 50
Tensile strength  (Mpa) CD
≥ 50
Elongation at break  (%) MD
≥ 95
Elongation at break  (%) CD
≥ 130
Low-temperature impact test broken rate  (%) (-25ºC)
≤ 30
Rotating impact tests pass  (%)
≥ 85
The bleaching
Observations
Transparency
≥ 85
Haze
≤ 1.5
 
Packing, storage and transportation
20 or 25 kg paper bag.
This material is non-dangerous good for land, air and marine transportation.
Material should be kept away from flames, hot pipes, heater or other sources of heat. Adequate precautions should be taken to keep all dust levels below values that are hazardous to heath and safety. The recommended maximum storage temperature for this material is 45 deg.C.
 
FDA compliance
Compliance with FDA and European food and packaging regulations.
  
Safe Handling
Please consult the MSDS before handling for additional information concerning personal protective equipment, Safety, Health and Environmental information, and always exercise the utmost care in handling.

Related links

MBS 710 TDS. pdf

MBS Impact Modifier Selection Guide. pdf

[Go Back]

Office: 8 F/L.,Renhe Mansion, No.399, Xuanwu street, Economic developing Zone, Weifang City, Shandong Province, China.
Post code: 261031  TEL: +(86) 536 8057068  FAX: +(86) 536 8057018  Email:  info@sundow.com    
Chlorinated polyethylene (CPE) - Acrylic processing aid - Acrylic Impact ModifierMBS Imapct Modifier - Polychloroprene rubber - Chlorosulfonated polyethylene - ADC blowing agent   Privacy Policy 
Copyright © sundow.com