中文版 Go to Englisth Web русский
中文版  English русский
Product Group
Acrylic Processing Aid (AIP)

Transparent Processing Aid

Addtime: 2012-5-9

                  WELLPLA TM   Acrylic Processing Aid:AIP 5510 & AIP 2000
 
 
Introduction 
 AIP 5510 and AIP 2000 are acrylic processing aids based on a medium molecular weight acrylic polymer resin,.
 they can be used in rigid PVC formulations to improve process ability and the surface quality, and these two grades are very suitable for transparent products.

 
Benefits
l Promote the fusion
l  Excellent transparency for PVC finished products
l  Excellent surface gloss of PVC products

Application
 AIP 5510 and AIP 2000 can be widely used in the PVC products especially for transparent products, such as PVC transparent film, sheet, bottle and so on.
     


   Technical Specification

Specification

Unit

Test standard

AIP 5510

AIP2000

Appearance

--

--

White powder

White powder

Bulk density

g/cm3

GB/T 1636-2008

0.45±0.10

0.45±0.10

Sieve residue (30 mesh)

%

GB/T 2916

≤2.0

≤2.0

Volatile content

%

ASTM D5668

≤1.50

≤1.30

Intrinsic viscosity (η)

--

GB/T 16321.1-2008

2.5-3.5

3.0-5.0


   Fusion promotion effect
 
    
            Fig. 1: Brabendar fusion time comparison                Fig. 2: Brabendar torque comparison


                               (1)  0 phr. AIP 5510                                                         (2) 1.5 phr. AIP 5510
                Fig. 3: Comparison of PVC fusion behavior on roller mixer without and with 1 phr AIP

   Packing,Transportation and Storage
   20 kg / 25 kg bag, 250 kg / 500 kg super sack.
   This material is non-dangerous goods for land, air and marine transportation,
   Material should be kept from flames, hot pipes, heaters or other sources of heat.
   Adequate precautions should be taken to keep all dust levels below values that are hazardous to heath and safety. 
   The recommended maximum storage temperature for this material is 45 deg. C.

  Safe Handling
  Please consult the MSDS before handling for additional information concerning personal protective equipment,

 

[Go Back]

Office: 8 F/L.,Renhe Mansion, No.399, Xuanwu street, Economic developing Zone, Weifang City, Shandong Province, China.
Post code: 261031  TEL: +(86) 536 8057068  FAX: +(86) 536 8057018  Email:  info@sundow.com   lucky@sundow.com  
Chlorinated polyethylene (CPE) - Acrylic processing aid - Acrylic Impact ModifierMBS Imapct Modifier - Polychloroprene rubber - Chlorosulfonated polyethylene - ADC blowing agent   Privacy Policy