中文版 Go to Englisth Web русский
中文版  English русский
Product Group
Acrylic Processing Aid (AIP)

AIP 3860

Addtime: 2012-5-9

WELLPLA TM    Acrylic Processing Aid    AIP 3860
Revision date: 01 Oct.2011 
Introduction
AIP 3860 is a general purpose acrylic processing aid for opaque PVC products. It can be applied to opaque PVC products such as window profile, siding, fence, pipe, fitting and other injection parts.
 
Performance
- Excellent fusion promotion efficiency
- High economic
- Higher dispersibility in the PVC melt.
- Better melt strength enhancement
- Improvement on surface uniformity
        
Application
Opaque  PVC products such as window profile, siding, fence, pipe, fitting and other injection parts.
 
Typical property
Test item
Unit
AIP 3860
Appearance
 
White powder
Bulk density  
g/cm3
≥ 0.30
Volatiles
%
≤ 1.0
Sieve reminder, 0.425 mm sieve  
%
 2.0
Intrinsic viscosity  (η) 
100 mL/g
3.0 - 5.0
 
Packing, transportation and storage
20 kg / 25 kg bag, 250 kg / 500 kg super sack.
This material is non-dangerous goods for land, air and marine transportation.
Material should be kept from flames, hot pipes, heaters or other sources of heat. Adequate precautions should be taken to keep all dust levels below values that are hazardous to heath and safety. The recommended maximum storage temperature for this material is 45 deg.C.

Safe Handling
Please consult the MSDS before handling for additional information concerning personal protective equipment, Safety, Health and Environmental information, and always exercise the utmost care in handling.

Related links

AIP 3860 TDS. pdf

[Go Back]

Office: 8 F/L.,Renhe Mansion, No.399, Xuanwu street, Economic developing Zone, Weifang City, Shandong Province, China.
Post code: 261031  TEL: +(86) 536 8057068  FAX: +(86) 536 8057018  Email:  info@sundow.com   lucky@sundow.com  
Chlorinated polyethylene (CPE) - Acrylic processing aid - Acrylic Impact ModifierMBS Imapct Modifier - Polychloroprene rubber - Chlorosulfonated polyethylene - ADC blowing agent   Privacy Policy