中文版 Go to Englisth Web русский
中文版  English русский
Product Group
Acrylic Processing Aid (AIP)

General Processing Aid

Addtime: 2012-5-9

 WELLPLA TM     Acrylic Processing Aid: AIP 2100 ,AIP 2300 & AIP 3800
                       

Introduction
AIP 2100, AIP 2300 and AIP 3800 are general purpose acrylic processing aid based on medium-high molecular weight.
It can be applied to PVC building and construction materials such as window profile, siding, fence, pipe, fitting and other injection parts.
AIP 2300 and AIP3800 are also extremely cost-effective, requiring only very low addition levels for high-quality results.

Benefits
 
l  Promotes faster fusion
l  Increases melt strength, enhances extensibility and improves melt homogeneity
l  Increases the surface glossy of PVC finished products.
l  Enhances extensibility and improves melt homogeneity

Application
It can be widely used PVC profile, siding, fence, pipe, fitting and other injection parts.

Technical Specification

Specification

Unit

Test standard

AIP2100

AIP2300

AIP3800

Appearance

--

--

White powder

White powder

White powder

Bulk density

g/cm3

GB/T 1636-2008

0.50±0.10

0.45±0.10

0.45±0.10

Sieve residue

(30 mesh)

%

GB/T 2916

≤1.0

≤2.0

≤2.0

Volatile content

%

ASTM D5668

≤1.30

≤1.50

≤1.50

Intrinsic viscosity (η)

--

GB/T 16321.1-2008

3.0-5.0

4.0-6.0

6.0-7.5



Fusion promotion effect
Fig.1: two finished specimens prepared on two roll mill based on 1.5 phr and 0 phr AIP 2300 
The result from Fig.1 demonstrates AIP 2300 could improve PVC fusion, and obtain better surface uniformity and gloss.
 
 
Fig. 2: Fusion time vs. AIP ration
The result from Fig.2 shows AIP 2300 can accelerate PVC fusion

Packing,Transportation and Storage
  20 kg / 25 kg bag, 250 kg / 500 kg super sack.
  This material is non-dangerous goods for land, air and marine transportation,
  Material should be kept from flames, hot pipes, heaters or other sources of heat.
  Adequate precautions should be taken to keep all dust levels below values that are hazardous to heath and safety. 
  The recommended maximum storage temperature for this material is 45 deg. C.

Safe Handling
 Please consult the MSDS before handling for additional information concerning personal protective equipment

[Go Back]

Office: 8 F/L.,Renhe Mansion, No.399, Xuanwu street, Economic developing Zone, Weifang City, Shandong Province, China.
Post code: 261031  TEL: +(86) 536 8057068  FAX: +(86) 536 8057018  Email:  info@sundow.com   lucky@sundow.com  
Chlorinated polyethylene (CPE) - Acrylic processing aid - Acrylic Impact ModifierMBS Imapct Modifier - Polychloroprene rubber - Chlorosulfonated polyethylene - ADC blowing agent   Privacy Policy