中文版 Go to Englisth Web русский
中文版  English русский
Product Group
Acrylic Processing Aid (AIP)

Lubricant Processing Aid

Addtime: 2012-5-9

                                                    WELLPLA TM Acrylic Processing Aid (AIP) 1750
  
Introduction
AIP 1750 is a lubricating processing aid. It can effectively improve metal release and avoid adhesion between PVC melt and metal surface.
It can be used separately or with other processing aid to promote PVC fusion. It can be used in all kinds of PVC rigid products to promote metal release and extend production cycle.
 
Benefits
 
l  Enhanced metal release without influence on fusion

l  Improved melt flow ability

l  Improved thermal stability

l  Excellent clarity and surface quality for end products

Application
AIP 1750 can be widely used in the window profile, sheet, fencing, pipes, pipe fitting, etc.


Technical Specification

Specification

Unit

Test standard

 AIP 1750

Appearance

--

--

White powder

Bulk density

g/cm3

GB/T 1636-2008

0.45±0.10

Sieve residue(30 mesh)

%

GB/T 2916

≤1.0

Volatile content

%

ASTM D5668

≤1.30

Intrinsic viscosity (η)

--

GB/T 16321.1-2008

0.5-1.5


Fusion promotion
 As shown in Fig.1, AIP 1750 could promote PVC fusion greatly that the fusion time is shorter than that of foreign competitor’s product at the same dosage. ­

                                                               Fig. 1: Fusion time comparison 
 
           

                               Fig.2: The Brabender fusion curve of AIP 1750 and a foreign brand          
                
                                                          ____ AIP 1750   ____ foreign brand
  
 
Packing,Transportation and Storage
20 kg / 25 kg bag, 250 kg / 500 kg super sack.
This material is non-dangerous goods for land, air and marine transportation,
Material should be kept from flames, hot pipes, heaters or other sources of heat.
Adequate precautions should be taken to keep all dust levels below values that are hazardous to heath and safety. 
The recommended maximum storage temperature for this material is 45 deg. C.
 
Safe Handling
Please consult the MSDS before handling for additional information concerning personal protective equipment,
 

[Go Back]

Office: 8 F/L.,Renhe Mansion, No.399, Xuanwu street, Economic developing Zone, Weifang City, Shandong Province, China.
Post code: 261031  TEL: +(86) 536 8057068  FAX: +(86) 536 8057018  Email:  info@sundow.com   lucky@sundow.com  
Chlorinated polyethylene (CPE) - Acrylic processing aid - Acrylic Impact ModifierMBS Imapct Modifier - Polychloroprene rubber - Chlorosulfonated polyethylene - ADC blowing agent   Privacy Policy