中文版 Go to Englisth Web русский
中文版  English русский
Product Group
Chlorinated Polyvinyl Chloride (CPVC)

CPVC Compound

Addtime: 2016-3-25

SURPLA TM CPVC Compound 
Technical Data Sheet          Revised 25 March 2016


Features of Surpla TM CPVC Compound
* Easily to use, customers don’t need to add any more additives;
* Superior processibility, wide processing range, finished end products;
* Excellent mechanical strength at high temperature;
* High Vicat softening point, excellent heat resistance;
* Outstanding chemical and corrosion resistance;
* Excellent flame resistance and low smoke generation;
 
Supply Specification
Item
Test standard
Pipe grade
Fitting grade
Grade
 
Surpla TM ETC-100A
Surpla TM ETC-100B
Surpla TM IJC-200A
Surpla TM IJC-200B
Color
-
Beige / gray
Orange/red
Beige / gray
Orange/red
Specifi gravity
g/cm3
ASTM D 792
1.45 - 1.60
1.45 - 1.60
1.45 - 1.60
1.45 - 1.60
Vicat softening
temperature, °C
ISO 2507
≥ 110
≥ 108
≥ 103
≥ 100
Tensile strength
MPa
ASTM D 638
≥ 50
≥ 50
≥ 54
≥ 50
Notched Izod impact
strength, kJ/m2
ASTM D 256
10.0
10.0 
12.0
12.0 
Flexural modulus
MPa
ASTM D 638
≥ 2800
≥ 2500 
≥2400
≥2200 
Application
 
Hot water pressure pipe
Sprinkler pipe
Hot water pipe fitting
Sprinkler
pipe fitting
 

Application
Surpla TM ETC100A: Extrusion of hot water pressure pipe;
Surpla TM ETC100B: Extrusion of sprinkler pipe;
Surpla TM IJC200A: Injection molding of pressure fitting for hot water;
Surpla TM IJC200B: Injection molding of sprinkler pipe fitting

Service
Provide processing guide.
Provide tailor-made CPVC compound grades according to customers’ technical requirement and processing condition.

Packing
25 kg PP woven bag, 17mt in 20 FCL no palletilized, 15 mt in 20 FCL palletilized.
This material is non-dangerous goods for land, air and marine transportation.
Material should be kept from flames, hot pipes, heaters or other sources of heat. Adequate precautions should be taken to keep all dust levels below values that are hazardous to heath and safety. The recommended maximum storage temperature for this material is 45 deg.C.

Safe Handling
Please consult the MSDS before handling for additional information concerning personal protective equipment, Safety, Health and Environmental information, and always exercise the utmost care in handling.

[Go Back]

Office: 8 F/L.,Renhe Mansion, No.399, Xuanwu street, Economic developing Zone, Weifang City, Shandong Province, China.
Post code: 261031  TEL: +(86) 536 8057068  FAX: +(86) 536 8057018  Email:  info@sundow.com   lucky@sundow.com  
Chlorinated polyethylene (CPE) - Acrylic processing aid - Acrylic Impact ModifierMBS Imapct Modifier - Polychloroprene rubber - Chlorosulfonated polyethylene - ADC blowing agent   Privacy Policy